This is a revised template that now includes the ability to mark the holes for a Mini CSP too!This is for Openreach/Contractor engineers to allow perfect alignment of the 4 types of ONT the Mini CSP that are currently being fitted at customers properties. ( Huawei only on the template incase a shift of the that type of ONT is required! )When fitting an ONT the flat top of the template is equal to the top of any of the ONT’s being fitted. Just place the top of the ONT Template at the height required, level it and mark the holes for the ONT.For the new ZYXEL ONT the Top of the Top CSP hole is equal to the top of the ONT. Just use the Nokia holes.The template has 2 none slip pads on the back, so just press while marking the holes and it will not slip.For the best results use a small screwdriver to mark the holes and 6mm headed screws. The 6mm screws allow a perfect fit everytime!When using it to mark the holes for the Mini CSP, just use the TOP hole and the 2 holes marked CSP where you want to put the Mini CSP on the wall.I hope you find this useful.*** Please note that these are 3D printed and may have some imperfections. These imperfections do not affect the accuracy of the template ***
